Fixed brackets
A fixed mount keeps the screen close to the wall and suits a room watched from one main seat. Rear plugs and spacers can still create a gap. Access for later cable changes may be tighter than with a moving mount.
TV bracket fitting & supply
TV bracket fitting and supply
Choose a bracket that suits how you watch, then fit it to a wall that can support the screen. We arrange TV bracket fitting, and bracket supply can be included when you do not already have a suitable mount.
TV bracket fitting matched to your screen and wall
The TV model, its weight and its mounting-hole pattern, often called VESA, determine bracket compatibility. Two screens with the same diagonal size can still need different brackets and hardware. Manufacturer guidance for the rear casing and permitted mounts matters as much as the hole spacing.
Tilting brackets
Tilt adjusts the vertical angle, which helps when the screen sits a little above seated eye level. It does not turn the TV sideways or make an unsuitable high position comfortable on its own.
Full-motion brackets
An extending arm can bring a screen out of a corner or towards a second seat. Screen width, arm reach and nearby furniture limit the usable turn. The wall must support the load when the TV is pulled forward, not only when it is folded flat.
Bracket supply when you do not already have a suitable mount
An existing bracket can be assessed using its model specification and mounting instructions. Compatibility still needs checking against the television and the wall. Missing bolts or an unlabelled second-hand mount need resolving before fitting can be agreed.
When a bracket is needed as well, supply can be arranged with the fitting. The choice follows the screen specification, the movement you want and the supporting wall—not a single stocked model promised for every job.
Hardware, spacers and any model-specific requirements belong in the same discussion. A matching VESA pattern alone does not establish that a mount is suitable for the whole installation.
Wall plate fitting, screen attachment and levelling
The wall plate, the attachment on the back of the television and the screen itself have to work together. Positioning is set from the seating before final fixing, so the finished television sits where you watch—not merely where the plate fits.
Levelling, retaining the screen and checking any intended movement complete the fitting. Cable clearance belongs here too: a level screen still needs room for plugs and, with a moving arm, enough freedom for the leads.
TV brackets, cable finishes and soundbar clearance
Bracket fitting is the core of TV wall mounting. The mount choice also shapes cable management space and whether a soundbar can sit cleanly below the screen. For a replacement television on an existing wall plate, reuse only makes sense when rating, pattern and hardware still match.
TV bracket questions
What is VESA and why does it matter?
VESA describes the mounting-hole pattern on the back of the television. The bracket must match that pattern and also support the screen’s weight. Two TVs with the same diagonal size can still need different hole spacings and hardware.
Can I use the bracket I already bought?
Often yes, when its rating, mounting pattern and hardware suit the television and the wall can support it. Its model specification and mounting instructions establish the permitted use. An unlabelled or incomplete second-hand mount needs resolving before fitting is agreed.
Do I have to buy the bracket separately?
Not necessarily. Bracket supply can be arranged with the fitting when you do not already have a suitable mount. The quote should show supply and fitting clearly rather than burying them in a vague total.
Fixed vs tilt vs full-motion — how do I choose?
Choose fixed for a single viewing position and a close wall fit. Choose tilt when you need a vertical angle adjustment. Choose full-motion when the screen must turn or pull out, remembering that reach, furniture and cable slack limit the movement.
Can a full-motion bracket go on plasterboard?
Sometimes, when the supporting structure and fixings suit the load with the arm extended. Plasterboard is a wall system, not a guarantee of strength on its own. The screen weight, arm leverage and stud or lining layout are assessed together.
Will a slim TV sit flush with no gap?
A close fit is often possible, but rear plugs, spacers and cable connectors still need room. The slimmest bracket on the box may not match the clearance your ports require. Flush looks and future cable access can pull in opposite directions.
Does screen size on the bracket box prove compatibility?
No. Size ranges are only a starting guide. Weight limits, VESA pattern, hardware and any TV-maker restrictions matter more. Always check the exact television model against the mount.
Can you fit a bracket above a fireplace?
Only where heat, height and the TV manufacturer’s placement guidance allow it. A tilting bracket does not remove heat exposure. Another wall is often the better everyday viewing position.
Can old fixing holes be reused for a replacement bracket?
Possibly, where their position and condition suit the new plate and the supporting wall. A different bracket may need new fixing points. Filling abandoned holes, repairing damaged plaster and redecorating are finishing tasks rather than automatic parts of securing the replacement mount.
Is bracket fitting separate from cable management?
Fitting secures the mount and screen; cable finishing is the route and cover for the leads. They are often planned together because the bracket style changes how much slack and rear space you need. Bracket fitting and cable finishing can also be arranged separately.
Get a TV bracket installation quote
TV bracket fitting and supply for fixed, tilt and full-motion mounts.
Your details may be shared with a suitable service provider to respond to your enquiry. Please include only information needed for the job.
TV mounting areas we cover
Areas we cover for TV bracket installation
Choose your area for service information and quote details.