With a new wall-mounted TV
The screen position and cable route can be planned together. The entry point behind the TV, the exit near the unit and the space needed for plugs all influence how clean the final wall looks.
TV cable management services
TV cable management and concealment
Give your wall-mounted TV a cleaner finish, without leaving a tangle of leads between the screen and the equipment below. We arrange TV cable management with surface trunking or a suitable concealed route, for new installations and existing setups.
TV cable management for a clean finish
The work connects the layout of the room with the finish on the wall. Leads are brought together along a route between the television, power point and connected equipment, then covered or concealed in the agreed way. The aim is a tidy installation that still lets you use and change your devices.
Improving an existing setup
A mounted TV can look unfinished because leads trail down the wall or spread across a unit. Cable management can improve that layout without replacing the television. Access behind the screen may involve taking it off its bracket and remounting it.
After equipment changes
A new console, soundbar or TV box can mean more leads or a different connection point. Bringing those changes into the cable route prevents a neat original installation becoming a collection of separate visible runs.
Surface trunking: covered cables, without opening a channel
Trunking encloses the cable run on the face of the wall. It suits rooms where a visible cover is acceptable and opening the wall is not wanted. A route that ends neatly behind the TV and near a media unit can make the cover less prominent.
The run includes its corners and end points, not just the straight length down the wall. Skirting, sockets and furniture affect those details. Sizing needs to accommodate the intended leads and connectors rather than squeezing everything into the smallest cover.
Surface trunking avoids chasing, but its attachment and later removal can still affect paint or plaster. It is a different finish from fully hidden wiring, not an invisible or guaranteed damage-free alternative.
Cables for the TV and everything connected to it
A Sky or Virgin box, games console, streaming device and soundbar do not necessarily belong in the same place. Keeping equipment in a media unit can preserve access to discs, controls and ventilation while the TV leads follow a covered route to the screen.
Soundbars add another connection path. Depending on the model, the audio link may use HDMI ARC/eARC or optical. The chosen route needs to reach the appropriate port and leave room for the connector behind a close-fitting TV.
Connection work can form part of the installation, with picture and sound checked using the agreed devices.
A finish planned around power and decoration
The socket position can determine how much of a cable run remains visible. Adding or relocating a mains socket is electrical work for a competent electrician, separate from simply covering the television’s leads. The electrical arrangement needs to suit the concealed route, rather than simply pushing an appliance lead out of sight.
If the wall needs opening, the cable route, access points and final surface finish belong in the same plan. Plaster repairs and repainting are distinct tasks; arranging concealment before final decoration avoids having to undo a newly finished wall.
Cable finishing for a complete TV installation
Cable management can be arranged with TV wall mounting or as work on an existing setup. If the bracket is changing too, bracket fitting and supply affect the space available for connections. A soundbar installation often shares the same route. The screen, equipment and route are treated as one layout rather than three unrelated jobs.
Cable management questions
Can TV cables be hidden in plasterboard?
In a suitable cavity or stud wall, a concealed route between access points can keep leads out of sight. Obstructions, existing wiring and the real construction decide whether that route is achievable. Concealment is assessed for the wall you have, not promised for every plasterboard room.
What about hiding cables on a solid brick or block wall?
Solid walls often need a chased channel if the run is to disappear, followed by making good and decorating. That is a different job from dropping cables through a cavity. Surface trunking avoids chasing when you prefer not to open the finish.
Is trunking the same as fully hidden wiring?
No. Trunking covers the run on the face of the wall; it stays visible but gathers the leads neatly. It can suit already decorated rooms where access matters more than a completely clear wall. Attachment and later removal can still affect paint.
Will cable management work with a full-motion bracket?
Yes if the final section of cable has enough freedom to move when the arm extends and folds back. A route that is neat when the TV is flat can pull tight once the screen comes forward. Slack and strain relief belong in the plan.
Can you tidy cables on a TV that is already mounted?
Often yes. Access behind the screen may mean taking the television off its bracket and remounting it afterwards. Removing and refitting the screen involves additional handling, even when the existing bracket can stay in place.
Do soundbars and games consoles use the same cable route?
They can share containment, but they do not always sit in the same place. A console may stay in a media unit while the TV leads climb the wall; a soundbar may need ARC/eARC or optical to reach a specific port. A route with room for all the connected devices avoids several separate runs across the wall.
Will I still be able to change an HDMI lead later?
That depends on entry and exit points, connector space and whether the route can accept a plug, not only a thin cable. Leaving workable access avoids remounting the TV for every equipment upgrade. Accessible connections are particularly useful when consoles or TV boxes change regularly.
Does cable concealment include a new power socket?
No. Adding or moving a mains socket is electrical work for a competent electrician. Cable management covers routing and covering the television’s leads and related signal cables. Socket position still shapes how much of a run stays visible.
What changes the cable management quote?
Route length and turns, wall type, trunking versus concealment, connector sizes and whether the TV must come down for access. A short drop to a unit below the screen differs from a concealed run across the room. Materials and wall finishing are separate from fitting the TV bracket.
Get a cable management quote
TV cable management, surface trunking and suitable behind-wall concealment.
Your details may be shared with a suitable service provider to respond to your enquiry. Please include only information needed for the job.
TV mounting areas we cover
Cable management areas we cover
Choose your area for service information and quote details.